|
HIGH PERFORMANCE POLYETHYLENE KNITTED GLOVE - DOUBLE NITRILE-COATING PALM VV910 DELTAPLUS
Description
High performance polyethylene support. Thermoplastic (TPR) reinforcement on back and fingertips. Smooth nitrile coating/foam nitrile on palm and fingertips. Embossed inside reinforcement on palm. Kevlar® thread on all the seams.
Support: High performance polyethylene fibre.
Coating: nitrile.
Back reinforcement: TPR.
Premium Cut level 5 Cut level D
Ref. : VV910
REGULATION (EU) 2016/425
EN420:2003+A1:2009 General requirements
5 Dexterity (from 1 to 5)
Protective gloves against mechanical Risks (Levels obtained on the palm)
EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)
4 Resistance to abrasion (from 1 to 4)
X Resistance to cutting (from 1 to 5)
4 Resistance to tear (from 1 to 4)
3 Resistance to puncture (1 to 4)
D Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
P Protection against impact in metacarpal area (P) (EN13594:2002 6.8.2)
USA STANDARDS
Hand Protection
ANSI-ISEA 105:2016 Hand Protection
A3 Resistance to cutting by sharp objects (from A1 to A9)
Support: High performance polyethylene fibre.
Coating: nitrile.
Back reinforcement: TPR.
Premium Cut level 5 Cut level D
Ref. : VV910
REGULATION (EU) 2016/425
EN420:2003+A1:2009 General requirements
5 Dexterity (from 1 to 5)
Protective gloves against mechanical Risks (Levels obtained on the palm)
EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)
4 Resistance to abrasion (from 1 to 4)
X Resistance to cutting (from 1 to 5)
4 Resistance to tear (from 1 to 4)
3 Resistance to puncture (1 to 4)
D Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
P Protection against impact in metacarpal area (P) (EN13594:2002 6.8.2)
USA STANDARDS
Hand Protection
ANSI-ISEA 105:2016 Hand Protection
A3 Resistance to cutting by sharp objects (from A1 to A9)