 |
PVC GLOVE - LENGTH 35 CM PVC7335 DELTAPLUS
Description
PVC on interlock cotton lining. Length: 35 cm. Thickness 0,90 mm.
Support: interlock cotton.
Coating: 100% cured and vulcanised PVC.
Essential
Ref. : PVC7335
REGULATION (EU) 2016/425
EN420:2003+A1:2009 General requirements
5 Dexterity (from 1 to 5)
Protective gloves against mechanical Risks (Levels obtained on the palm)
EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)
3 Resistance to abrasion (from 1 to 4)
1 Resistance to cutting (from 1 to 5)
3 Resistance to tear (from 1 to 4)
1 Resistance to puncture (1 to 4)
X Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
Protective gloves against dangerous chemicals and micro- organisms - Part 1: Terminology and performance requirements for chemical risks.
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms - Part 1: Terminology and performance requirements for chemical risks.
TYPE C Type C - Water and air tightness according to EN374-2:2014. Permeation resistance to at least 1 chemicals at level 1 according to EN16523-1: 2015 (from 1 to 6).
. Determination of resistance to degradation by chemicals according to EN374-4: 2013. Part 4: Determination of resistance to degradation by chemicals.
K 6 > 480 mn Caustic soda 40% (K) CAS 1310-73-2
Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements against micro- organisms risks.
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements against micro- organisms risks.
BACTERIA + FUNGI . BACTERIA + FUNGI : Water and air tightness according to EN374-2:2014.
Support: interlock cotton.
Coating: 100% cured and vulcanised PVC.
Essential
Ref. : PVC7335
REGULATION (EU) 2016/425
EN420:2003+A1:2009 General requirements
5 Dexterity (from 1 to 5)
Protective gloves against mechanical Risks (Levels obtained on the palm)
EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)
3 Resistance to abrasion (from 1 to 4)
1 Resistance to cutting (from 1 to 5)
3 Resistance to tear (from 1 to 4)
1 Resistance to puncture (1 to 4)
X Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
Protective gloves against dangerous chemicals and micro- organisms - Part 1: Terminology and performance requirements for chemical risks.
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms - Part 1: Terminology and performance requirements for chemical risks.
TYPE C Type C - Water and air tightness according to EN374-2:2014. Permeation resistance to at least 1 chemicals at level 1 according to EN16523-1: 2015 (from 1 to 6).
. Determination of resistance to degradation by chemicals according to EN374-4: 2013. Part 4: Determination of resistance to degradation by chemicals.
K 6 > 480 mn Caustic soda 40% (K) CAS 1310-73-2
Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements against micro- organisms risks.
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements against micro- organisms risks.
BACTERIA + FUNGI . BACTERIA + FUNGI : Water and air tightness according to EN374-2:2014.
